page 1 of 5 dc/dc converters TSM series, 1 watt features smd package (soic-14/18) construction in lead frame technology isolated single and dual output i/o isolation 1000 vdc high effciency operating temperature C40c to +85c refow solder temperature up to 245c high accuracy of pin co-planarity available in tape and reel package lead free design, rohs compliant 3-year product warranty the TSM series are isolated dc/dc converters with 1w output power implemented in a molded plastic package with a pin accuracy suitable for automated smd- production. the devices can be soldered without any problems in a high tempera - ture lead free solder process. with their small footprint these converters are the economical solution for point of load power conversion, ground loop elimination, noise reduction and digital interface applications. ordercode input voltage output voltage output current max. effciency typ. TSM 0505s 5 vdc 200 ma 80 % TSM 0509s 9 vdc 110 m a 78 % TSM 0512s 12 vd c 80 ma 80 % TSM 0515s 5 vdc 10% 15 vd c 65 ma 81 % TSM 0505d 5 vdc 100 ma 75 % TSM 0512d 12 vd c 40 ma 79 % TSM 0515d 15 vd c 30 ma 79 % TSM 1205s 5 vdc 200 ma 81 % TSM 1209s 9 vdc 110 m a 78 % TSM 1212s 12 vd c 80 ma 81 % TSM 1215s 12 vdc 10% 15 vd c 65 ma 82 % TSM 1205d 5 vdc 100 ma 75 % TSM 1212d 12 vd c 40 ma 80 % TSM 1215d 15 vd c 30 ma 80 % TSM 2405s 5 vdc 200 ma 81 % TSM 2409s 9 vdc 110 m a 78 % TSM 2412s 12 vd c 80 ma 81 % TSM 2415s 24 vdc 10% 15 vd c 65 ma 82 % TSM 2405d 5 vdc 100 ma 75 % TSM 2412d 12 vd c 40 ma 80 % TSM 2415d 15 vd c 30 ma 80 % models http://www.tracopower.com
page 2 of 5 input specifications input current no load / full load 5 vin models: 30 ma / 260 ma typ. 12 vin models: 15 ma / 110 ma typ. 24 vin models: 8 ma / 55 ma typ. surge voltage (1 sec. max.) 5 vin models: 9 v max. 12 vin models: 18 v max. 24 vin models: 30 v max. reverse voltage protection 0.3 a max. reflected input ripple current can be reduced by ext. 1C2.2 f polyester film capacitor input filter internal capacitors output specifications voltage set accuracy 3 % voltage balance (dual output models) 1 % max. regulation C input variation 1.2 % / 1 % change vin C load variation 20 C 100 % 10 % max. ripple and noise (20 mhz bandwidth) 120 mvpk-pk max. temperature coefficient 0.02 %/c short circuit protection limited 1 sec. max. capacitive load single output models: 22 f max. dual output models: 10 f max. general specifications temperature ranges C operating (see also enclosed derating curve) C40c to +85c (no derating) C storage C55c to +125c humidity (non condensing) 95 % rel h max. reliability, calculated mtbf (mil-hdbk-217f, at+25c, ground benign) >2000000 h isolation voltage (60 sec.) C input/output 1000 vdc isolation capacity C input/output 40 pf typ. isolation resistance C input/output >1000 mohm switching frequency 100 khz typ. (frequency modulation) frequency change over line and load 30 % environmental compliance C reach www.tracopower.com/products/reach-declaration.pdf C rohs rohs directive 2011/65/eu physical specifications casing material epoxy molding compound (flammability to ul 94v-0 rated) package weight single output models: 1.5 g (0.053 oz) , 1.8 g (0.064 oz) for 24 vin dual output models: 1.8 g (0.064 oz) , 2.2 g (0.078 oz) for 24 vin moisture sensitivity level 3 reflow soldering profile (ipc/jedec j-std-020d) peak temp. 245c (10 sec. max.) 217c for 90 sec. max. convection reflow solder process is recommended packaging www.tracopower.com/overview/TSM dc/dc converters TSM series 1 watt http://www.tracopower.com all specifcations valid at nominal input voltage, full load and +25c after warm-up time unless otherwise stated.
page 3 of 5 derating all TSM models outline dimensions ambient temperature [?c] -20 10 20 -40- 30 0 -100 10 30 20 40 30 90 50 60 80 100 40 50 60 70 80 110 90 100 20 10 0 +85?c +105?c -5.0% /?c output power [%] 70 40 30 50 60 80 100 90 output power [%] 70 7.0 (0.28) 9.2 (0.36) 11.1 (0.44) 4 s 6.5 (0.26) 0.25 (0.01) 2.0 7.62 (0.3) 0.6 (0.024) 2.54 8.0 (0.32) 2.5 14 8 7 1 12.7 (0.5) 14 8 7 1 na na na +v o +v in Cv in Cv o na seating plane 0.2 ms p 6.8 (0.27) 0.25 (0.01) 0.1 s (0.27) *7.8 (0.31) (0.1) (0.1) *7.4 (0.29) *8.3 (0.33) *8.1 (0.32) TSM single output models dimensions in [mm], () = inch pin pitch tolerances: 0.13 (0.0051) other tolerances: 0.25 (0.01) * dimensios for 24vin models na = not available for electrical connection dc/dc converters TSM series 1 watt http://www.tracopower.com
page 4 of 5 outline dimensions 10.16 (0.4) 4 seating plane s 2.5 (0.1) 15.24 (0.6) 18 10 9 1 18 10 9 1 na na na na +v o +v in Cv in Cv o na com 0.2 ms p 0.1 s 7.0 (0.28) 9.2 (0.36) 11.1 (0.44) 0.25 (0.01) 2.0 0.6 (0.024) 2.54 8.0 (0.32) 6.8 (0.27) 0.25 (0.01) (0.27) *0.0 *7.8 (0.31) (0.1) *7.4 (0.29) *8.3 (0.33) 6.5 (0.26) *8.1 (0.32) TSM dual output models dc/dc converters TSM series 1 watt dimensions in [mm], () = inch pin pitch tolerances: 0.13 (0.0051) other tolerances: 0.25 (0.01) * dimensios for 24vin models na = not available for electrical connection http://www.tracopower.com
page 5 of 5 solder pad dimensions mm (inches) dc/dc converters TSM series 1 watt TSM single output models TSM dual output models (0.067) 7. 6 2 (0.3) 2.54 2.54 2.54 ( 0.1) ( 0.1) ( 0.1) 10.8 (0.425) 1.0 min. (0.039 min.) 1.7 10.16 (0.4) 2.54 2.54 2.54 2.54 ( 0.1) ( 0.1) ( 0.1) ( 0.1) 10.8 (0.425) 1.0 min. (0.039 min.) 1.7 (0.067) rev. october 24, 2017 sp ec i?cati ons can be changed wi thout noti ce! make sure you are using the latest documentation, downloadable at www.tracopower. com www .tracopower. com
|
